Standalone digital variometer, final glide calculator, IGC flight recorder and navigation system with moving map. • Extremely bright 2.5’’ (~ 6.5cm) color display, readable in all sunlight conditions with the ability to adjust the backlight. • Two rotary switches (knobs) with push button function and three push buttons are used for input. • PDA inputs/outputs • Flarm Indication, when Flarm is connected to the GPS port • Additional Flarm radar screen and artificial horizon • Inertial assisted high precision pressure sensors • Built-in voice module and AHRS • IGC high level approved flight recorder • Integrated Bluetooth module • Internal battery with up to 3h autonomy • Integrated GPS module • Easy firmware upgrades via SD card • fast wind calculation with external compass • Indicator Ø57mm

 

Main Features

• Bluetooth integrated
• Built-in Battery which serves up to 3h of operation
• High level approved IGC flight recorder
• Built in GPS module
• ARM Cortex-M4 processor running on 160MHz
• 2.5'' QVGA sunlight readable screen with 1200nits
• QVGA (320*240pixels) sunlight readable display
• Digital temperature compensated pressure sensors for altitude and airspeed
• inertial platform 3 axis digital +-8g accelerometer, 3 gyroscopes (for inertial vario, AHRS and wind calculation - AHRS can be activated with the code)
• Smooth audio output
• Audio equalizer
• integrated synthesized speech output 
• audible thermal assistant
• External SD card for configuration, flarmnet and firmware update
• 2 rotary switches (knobs) with push button function and 3 push buttons are used for input
• ALS (ambient light sensor)
• 6 digital inputs - SC, VP + 4 custom defined
• 57 mm air norm

 

User Interface

• Moving map with airspace track up option
• Airspace display
• Waypoints and Task display
• AHRS display (optional)
• Thermal assistant
• Display of 4 configurable (navboxes) values
• Display of 3 configurable (navboxes) values on map screen
• Waypoint navigation
• TASK navigation
• Flarm radar
• Flarm warnings
• Flarm Net
• Logbook (Integrated High level approved flight recorder)

Color display

• 16 bit color display
• 2.5”(~ 6.5cm) screen
• 320 by 240 pixel resolution

 

Input and output

• Flarm port input/output on RS232 level (standard IGC 6 pin connector RJ11)
• PDA port input/output on RS232 or TTL level for PDA/PNA devices with 5V power supply (8 pin RJ 45, 5V output max 2A)
• Audio output
• 1Mbit CAN bus for connection for S8D repeater, Compass module or Remote stick
• Speed command and Vario priority input and 4 additional user defined inputs
• Two Rotary knobs with push function
• 3 push buttons

 

Optional accessories

• AHRS activation with a CODE - no need of any hardware upgrade
• Remote stick (CAN)
• Compass module (not supported yet - under development)
• S80D/S8D repeater unit
• Oudie
• Nano/Nano3

 

Power supply

• Power input 10-16V DC
• Consumption of LXNAV S10 at 12 V:
  • 230 mA - minimum brightness without audio
  • 270 mA - maximum brightness without audio
• Consumption of LXNAV S8D at 12 V:
  • 90mA - maximum brightness
  • 140 mA - maximum brightness without audi

 

Size and weight

• Standard 57mm (21") hole
• 61x61x70mm(exclusive connectors)
• weight: 345gr